×
Beigong develops a special fire pump for high-rise buildings. It is a fire pump which has very good efficiency in pumping out the water when there is a fire emergency. Their primary function is to assist and move the water to be used for extinguishing a fire. It operates by having a spinning piece known as an impeller spin quickly around. This impeller is driven by an electric engine or a diesel engine. A centrifugal pump is what most people prefer to use because it is capable of moving a lot of water very fast. This very rapid water movement is the key to getting water on the fire and thus the most important function of the fire hose.
In the firefighting systems, fire pumps are the integral part that helps in keeping the buildings fireproof. These pumps are then used to extract water from a source in case there is a fire and distribute (or spray) the liquid around a building. The fire pumps are normally installed in a dedicated pump room, commonly located at the lowest level of the building. This pump room allows you to securely store the pump while ensuring it is readily available for use. A fire pump provides water to certain essential systems like the sprinkler system and any other firefighting equipment located in the building. Fire pumps are vital to controlling and extinguishing fires in tall buildings.
Beigong's fire pump system is made to guaranteed buildings are as fire resistant as possible. It comprises not only the fire pump itself, however in addition a controller and all parts required for installation, together with pipes, valves and gauges. The controller is intelligent component of the system that makes a decision when to turn on and off the pump. The pump after all is activated to send a big quantity of water whenever when a fire occurs to extinguish the blaze. This pump is strong enough to push water very high, even to the floors at the top of the building. This allows firefighters can get access to the water they need regardless of the height of the fire.
Fire Pump is the best suitable for high building due to several reasons. The main reason for this is also that it can pump water to very high positions. The distance from the pump to the fire can be quite long in a fire emergency. This is where the fire pump comes in, as it is designed for high places. It has what’s known as a high-head space, meaning it can pump water from the basement of a building to a very top floor. This characteristic is what makes it the best way to pump water in tall structures and helps firemen to extinguish a fire much faster and safely.
When we consider other types of pumps and compare them to centrifugal pumps on the basis of fire emergencies, then centrifugal pumps win this criteria. They have a very high flow rate, meaning they can get lots of water moved in a very short amount of time. This fast-water dispersion is important for battling fires when firefighters need to obtain the water as soon as possible. Centrifugal pumps also operate at lower power than a lot of other pumps. Running on such low power consumption, it can run for long time without burning out or breaking down. They also feature important safety mechanisms, such as an automatic shut-off if the water level approaches too low. This prevents damage to the pump and ensures that it will function properly when it is needed.
Copyright © Hebei Beigong Pump Co., Ltd. All Rights Reserved - Privacy Policy
